Filter
Top Products
Select double or quadruple size
Mode ASCII
Decimal
Hexadecimal
Std.
cESC> “h” n 27104 n
18 68 n
Selects the size of subsequent characters as shown below. Extra-
high characters align along the cap-line of normal characters, with
the base line temporarily moving down. Line spacing is temporarily
doubled when n = 1 and quadrupled when n = 2.
n Effect
0 Normal size
1 Double-high, double-wide
2 Quadruple-high, quadruple-wide
Select character size
Mode ASCII Decimal
Hexadecimal
Bo* ..(,. ..(.. “S” ..).. .‘)..
d 4040934141 d 2828532929 d
Selects a combination of character height and width according to the
value of d, as below.
Does not move the base line.
d Line spacing
Character height
0 Single width Single weight
1 Double width Single height
2 Single width
Double height
3 Double width
Double height
Double-height characters are always printed at near letter quality.
Double height printing temporarily cancels the super/subscript and
condensed printing modes, but these modes resume when the printer
mums to normal mode.
Print double-height characters
Mode ASCII
Decimal
Hexadecimal
Std. <pJC> ..wI. “1”
27 119 49 1B 77 31
<Esc> “W” <l>
27 119 1 1B 77 01
Prints subsequent characters at double height without moving the
base line, and without changing the line spacing. Temporarily
cancels super/subscript and condensed modes.
77