Filter
Top Products
CHARACTER SET COMMANDS
Select standard character set
Mode
ASCII Decimal
Hexadecimal
Both
<ESC> “t” “0’
27 116 46
1B 74 30
<ESC> ‘Y co>
27 116 0
1B 74 00
Selects the standard character set. This is the power-up default in
Standard mode when the ‘Standard Italic” is selected with the
Memory Switch.
Select IBM character set
Mode ASCII
Decimal
Hexadecimal
Both
<ESC> “t” “1”
27 116 49 1B 74 31
<ESC> ‘Y <l>
27 116 1
IB 74 01
Selects an IBM character set. This is the power-up default in IBM
mode, or the “Standard Graphics’* is selected in standard mode.
Select character set #I
Mode] ASCII
Decimal
1 Hexadecimal
Both
1 <ESC> “7”
1
27 55 1
1B 37
Selects character set #l .
Select character set #2
1 Mode 1
ASCII 1 Decimal
1 Hexadecimal I
1 Both I <ESC> “6”
1 27 54
1 1B 36
I
Selects character set #2.
71