Filter
Top Products
2-2 Sun Ultra 20 Workstation Getting Started Guide • April 2006
FIGURE 2-1 Installation Flow Diagram
Install the operating system.
READY TO WORK!
See Section 1.5, “Powering On the Worksta-
tion” on page 1-8.
See Section 3.1, “Configuring Solaris 10 Op-
erating System Software” on page 3-1.
See Section 2.2, “Installing the Operating System” on
page 2-5.
Configure the
preinstalled
operating
system.
Use a
preinstalled
operating
system?
If installing Red Hat Linux,
run the up2date utility.
Is this a
Windows XP
or Solaris 10
installation?
Set up the
BIOS for a
Linux OS
installation.
See Section 2.1.2, “Setting up the BIOS for
Operating System Installation” on page 2-4.
See Section 2.3, “Running the up2date Utility” on page 2-6
Install the drivers from the Supplemental CD.
See Section 2.4, “Installing Drivers and Mounting the Diag-
nostic Partition” on page 2-6.
Is there
space on the
hard disk for
installation?
Use the
Supplemental
CD to erase
the primary
boot disk.
See Section 2.1.1, “Erasing the Primary Boot
Hard Disk” on page 2-3.
Ye s
Ye s
Ye s
No
No
No
Power on the workstation.
START