Filter
Top Products
Appendix A Creating Windows Images on a RIS Server and Installing RIS Images A-9
1. Change these entries in the ristndrd.sif file to read as follows:
2. Remove the following entry from the ristndrd.sif file:
3. Add the following entries to the ristndrd.sif file:
4. To create the $oem$ directory for the RIS image, type the following command:
[Unattended]
OemPreinstall = yes
[GuiUnattended]
AdminPassword = “<desired password>“
[Identification]
JoinDomain = %MACHINEDOMAIN%
DoOldStyleDomainJoin = Yes
[Unattended]
DriverSigningPolicy = Ignore
OemPnPDriversPath = “\drivers\audio;\drivers\nic;\drivers\sata_ide;\
drivers\smbus
“
[MassStorageDrivers]
“Nvidia RAID CLASS DRIVER (required)“=“OEM“
“Nvidia nForce Storage Controller (required)“=“OEM“
[OEMBootFiles]
nvatax64.sys
nvraid.cat
nvrdx64.inf
nvrdx64.sys
txtsetup.oem
[UserData]
ProductKey = XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
[Identification]
JoinWorkgroup = WORKGROUP
c:\ mkdir cdrom_drive:\RemoteInstall\Setup\English\Images\image_dir