Filter
Top Products
A-1
APPENDIX
A
Setting up the SNMP Agent
The Sun MediaCenter software is shipped with its own SNMP agent, which is part
of the SUNWsmsnm package. This agent is based on the SNMP agent shipped with
the Solstice Domain Manager (SDM); the agent has been extended to support the
Sun MediaCenter server. This appendix tells you how to configure the SNMP agent,
and how to access that agent using Solstice Domain Manager.
Note – Because you need to provide site-specific information when installing the
SNMP agent, the SUNWsmsnm package is not preinstalled on the Sun MediaCenter
server. Therefore, if you want to use the SNMP agent to manage the Sun
MediaCenter, you must install the SUNWsmsnm package from the “Sun MediaCenter
Software 2.1 Recovery” CD-ROM. To do this, access the CD-ROM and run the
swmtool or pkgadd program, then select the SUNWsmsnm package for installation.
(These steps are described in detail in Chapter 4 in the SunMediaCenter Server
Installation and Configuration Manual. The prompts that you will need to respond to
for SUNWsmsnm installation are also described in that manual.)
The SNMP agent described here is compatible with any SNMP-capable management
product. You are not limited to the use of Solstice Domain Manager in managing the
Sun MediaCenter server.
The Sun MediaCenter Server MIB page A-2
Enabling Management by Solstice Domain Manager page A-6
Enabling Trap Handling page A-9