Filter
Top Products
5-8
SUPERSERVER 5013C-M8 User's Manual
5-7 Adding PCI Cards
1. 64-bit PCI-X slot
The 5013C-M8 has a riser card (p/n CSE-RR1U-X) designed specifically for use
in the SC813MS-300C 1U rackmount chassis (included with the system). This
riser card allows a 64-bit, 66 MHz (3.3V) standard size PCI-X card to sit at a 90
degree angle so it can fit inside the chassis.
2. PCI card installation
Before installing a PCI-X add-on card, locate the PCI riser card mentioned in
Step 1. Begin by removing the I/O shield for the PCI-X slot (on the I/O
backplane). Fully seat the add-on card into the riser card and screw it into
the metal retention rail. Then, insert the riser card into the PCI slot on the
motherboard, pushing down with your thumbs evenly on both sides of the
card. Finish by using a screw to secure the top of the card shield to the
rear of the chassis. The I/O shield protects the motherboard and its compo-
nents from EMI and aids in proper system ventilation, so make sure either
the shield or an add-on card is always present.
Host Clock FSB (MHz)
(MHz)
100 400
133 533
200 800
DRAM Data Shown during
(MT/s) POST routine
266 DDR266
333 DDR266
400 DDR266
266 DDR266
333 DDR333
400 DDR333
266 DDR266
333 DDR320*
400 DDR400
Memory Speeds
* The BIOS displays DDR320 due to a chipset limitation.