Filter
Top Products
C-1
Appendix C: System Specifications
Appendix C
System Specifications
Processors
Single Intel® Pentium® 4 processor of up to 3.40 GHz with hyper-
threading technology at a 800/533/400 MHz front side bus speed
Chipset
Intel E7210
Memory Capacity
Four (4) DIMM slots to support a maximum of 4 GB unbuffered ECC or
non-ECC DDR400/333/266 low-profile SDRAM (dual-channel memory)
Note: all memory modules should be the same size, speed and type
DIMM Sizes
128 MB / 256 MB / 512 MB / 1 GB 184-pin modules supported
SCSI Controller
Adaptec AIC-7902 for dual channel Ultra320 SCSI
SCSI Backplane Controller
SAF-TE backplane to support four (4) SCA hot-swap SCSI drives
Peripheral Bays
One (1) slim CD-ROM drive
PCI Expansion Slots
One (1) 64-bit 66 MHz (3.3V) PCI-X slot (bundled with a riser card)
Motherboard
Model: P4SC8 (ATX Form Factor)
Dimensions: 12 x 9.5 in (305 x 241 mm)
Chassis
Model: SC813MS-300C (1U Rackmount)
Dimensions: (WxHxD) 17.2 x 1.7 x 19.85 in. (437 x 43 x 504 mm)
Note: for information on supported operating systems, please visit our
web site at www.supermicro.com