SUPER MICRO Computer X7SLA-L Computer Hardware User Manual


 
Chapter 4: AMI BIOS
4-13
PCI IDE Bus Master
Select Enabled to allow the BIOS to use the PCI bus master to read from and write
to the onboard IDE drives. The options are Enabled and Disabled.
PCI Slot 5, PCIE X8 Slot6, PCIE X4 Slot7
Select Yes to enable OPROM for a PCI slot as specied. The options are Yes (to
enable OPROM for the slot specied) and No.
Load Onboard LAN 1 Option ROM/ Load Onboard LAN 2 Option ROM
Select Enabled to load the onboard LAN Option ROM for the LAN port as specied.
The options are Enabled and Disabled.
SuperIOConguration
Serial Port1 Address/ Serial Port2 Address
This option species the base I/O port address and the Interrupt Request address
of Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial port from
accessing any system resources. When this option is set to Disabled, the serial port
physically becomes unavailable. Select 3F8/IRQ4 to allow the serial port to use 3F8
as its I/O port address and IRQ 4 for the interrupt address. The options for Serial
Port1 are Disabled, 3F8/IRQ4, 3E8/IRQ4, 2E8/IRQ3. The options for Serial Port2
are Disabled, 2F8/IRQ3, 3E8/IRQ4, and 2E8/IRQ3.
Serial Port 2 Mode
Use this feature to congure Serial Port 2 mode. The options are Normal, IrDA
and ASK IR.
Hardware Health Conguration
This feature allows the user to monitor Hardware Health of the system and review
the status of each item when displayed.
CPU Temperature
This feature displays the processor's absolute temperature (i.e., 34
o
C).
System Temperature
This feature displays the system's absolute temperature (i.e., 34
o
C).
Fan Speed Control Modes
This feature allows the user to decide how the system controls the speeds of the
onboard fans. The CPU temperature and the fan speed are correlative. When the
CPU on-die temperature increases, the fan speed will also increase, and vice versa.