SUPER MICRO Computer X7SLA-L Computer Hardware User Manual


 
4-16
X7SLA-L/X7SLA-H User’s Manual
4-4 Security Settings
The AMI BIOS provides a Supervisor and a User password. If you use both pass-
words, the Supervisor password must be set rst.
Change Supervisor Password:
Use this feature to set a supervisor password. It secures the system from unau-
thorized use by restricting access to persons only with the proper supervisor-level
password. Select this feature and press <Enter>, and then type in the Supervisor
Password.
User Access Level
This feature appears when the Supervisor Password is set. Use this to assign an
access level for a user. The options are: No Access, View Only, Limited, and Full
Access.
Change User Password:
Use this feature to set a user password. It secures the system from unauthorized use
by restricting access to persons only with the proper user-level password. Select
this feature and press <Enter>, and then type in the User Password.
Clear User Password
This feature appears when the User Password is set. Select this to clear the User
Password.
BIOS SETUP UTILTY
Main Advanced
Security
Boot
Exit
 : Move
Enter : Select
+/-/ : Value
F10 : Save
ESC : Exit
F1 : General Help
F8 : F a il-Safe Defaults
F9 : Optimized Defaults
vXX.XX (C) Copyright 1985-2009, American Megatrends, Inc.
Security Settings
Supervisor Pa ssword : Installed
User Pa ssword : Installed
Change Supervisor Pa ssword
User Access Level [Full Access]
Change User Pa ssword
Clear User Pa ssword
Pa ssword Check [Setup]
Boot Sector V i rus Protection [Disabled]
Install or Change the
password.