Tally Genicom mL450 Printer User Manual


 
May 04 Publication No. GEG-99197
TallyGenicom mL450 Laser Printer User Manual 7-21
Saved Jobs Feature
1. Press the MENU button on the control panel.
2. Press the NEXT button until the text “Job Library Menu” is shown on the second line of the
display.
3. Press the SELECT button to enter the Job Library Menu.
4. Press the NEXT button to move through the submenus: Print or Delete.
5. Press the SELECT button to enter a submenu.
Use the procedures in the following table to access and change the system settings.
Menu Submenus Procedure for Changing Setting
Job Library
(Saved Job)
Print
(To print a saved job)
1. Press NEXT or PREVIOUS to scroll through Print or
Delete options.
2. Press SELECT to choose Print.
Print
User Folder 1
1. Press NEXT or PREVIOUS to scroll through the
User Folder Names.
2. Press SELECT to choose the desired User Folder.
Print
Job1
1. Press NEXT or PREVIOUS to scroll through the
Print Job Names.
2. Press SELECT to choose the desired Print Job.
Job Name
Copies - Select 1-99
1. Press NEXT or PREVIOUS to increase or decrease
each digit of the two-digit number.
2. Press SELECT set one digit and move to the next
digit.
3. Press SELECT after changing the last digit to save
this setting.
Job Name
Copies
1. Press SELECT to print the job.
Printing
Playback
1. The printer will display PRINTING on Line 1 and
PLAYBACK on Line 2 of the display while printing
the job.
Job Library
(Saved Job with
PIN)
Print
(To print a saved job with a PIN)
1. Press NEXT or PREVIOUS to scroll through Print or
Delete options.
2. Press SELECT to choose Print.
Print
User Folder 1
1. Press NEXT or PREVIOUS to scroll through the
User Folder Names.
2. Press SELECT to choose the desired User Folder.
Print
Job1
1. Press NEXT or PREVIOUS to scroll through the
Print Job Names.
2. Press SELECT to choose the desired Print Job.
Job Name
PIN
1. Press NEXT or PREVIOUS to increase or decrease
each digit of the four-digit number.
2. Press SELECT to set one digit and move to the
next digit.
3. Press SELECT after changing the last digit to save
this setting.