Filter
Top Products
Publication No. GEG-99197 May 04
3-20 TallyGenicom mL450 Laser Printer User Manual
Adding paper to the multi bypass feeder
8. Adjust the length guide to the paper length.
NOTE: Make sure the guide stopper is locked firmly in the guide hole on the bottom of the cassette.
Adjust the guide to the paper size correctly otherwise paper may not be transported correctly
and may result in a paper jam.
9. Insert a correct paper size label into the paper size slot on Tray 2, then push the cassette all
the way back into the printer until it latches.
Adding paper to the multi bypass feeder
The multi bypass feeder can hold about 50 sheets (up to 80g/m
2
or about 3/16” or 5mm high) of
paper. When adding paper, make sure the height of the paper stack is below the paper limit mark
on the multi bypass feeder.