Filter
Top Products
May 04 Publication No. GEG-99197
TallyGenicom mL450 Laser Printer User Manual 1-15
For standard configuration
Connecting the Ethernet Cable
1. Attach appropriate cable to your Ethernet hub.
2. Attach the opposite end of the cable to the ethernet port on the printer.
Connecting the Power Cord
Connect the printer to an AC outlet as described below.
Do not plug the printer into an AC outlet with incorrect voltage.
Do not use any multi-extension cord connector otherwise there is a risk of fire and electric
shock.
Do not use extension cords with rated current less than 124V 15A. Never use extension
cords with low capacity, or extreme heat or flame may result. Consult your dealer on the cor-
rect type of extension cord to use.
Do not damage or modify the extension cord. Also, do not bend, pull, or place heavy objects
on the extension cord otherwise the extension cord may be damaged and result in fire hazard
or electric shock.
See “Safety Notes” on page B-2.
AC outletPower cord
1. Insert the power cord into the AC connector on the printer
WARNING: To prevent the risk of electric shock, never touch the power cord or plug with
wet hands.
CAUTION: When disconnecting the power cord, always grasp the plug and do not pull at the
cable. Damage to the cord can lead to fire and electric shock.