Filter
Top Products
Index-4
PHONE
connector pinouts B-7
Pinouts
EIA/TIA 232-D B-2
interface
3260/65 C-18
3261/66 C-19
3262/67 C-22
3263/68 C-22
ITU V.35 recommendatio nB-5
LEASE LINE B-6
NC (Network Control) port B-7
PHONE B-7
pinouts C-39
Poland C-7
Portugal C-10
Postscript number 5-4
power cable 2-7, 2-9, 2-14
power connectors 2-5
R
RC ABORTED message A-41
RC COMPLETE messag eA-41
RC DENIED message A-41
RC ESTABLISHED message A-41
RC FAILED message A-41
RC NOT AVAILABLE message A-41
RC SESSION IN PROGRESS message A-41
RC/NC LED 3-4
Re 5-6
rear panel views C-12
redial attempts C-23
Redialing
last number 5-9
Re-executing AT command (A/) 5-7
regulations 1-9, 2-2
Reinitializing the modem 4-5
Reliable connection
AT messages 5-5
Reliable mode 5-13
Remote Access Reset 4-28
remote configuratio n5-8, A-45
REN C-33, C-36
restoral 4-9, 4-16, 4-20, 4-22, C-16
restricted commands C-12
restricted features C-5
Result codes
AT, word form A-41
Return character (S-Register 3 5-11
RFI and ferrite cylinder 2-7
Ring count (S-Register 1) 5-11
Ring count to answer on (S-Register 0) 5-10
RING message A-41
Rockwell-based modems 5-18
router 4-16
RTS/CTS delay (S-Register 26) 5-15
S
SDC
configuring 4-22
operational requirements 4-21
pre-operation note s4-21
SDC tests 6-11
Security features 1-8
self-test 2-15
Serial cable
equipment needed 2-4
Site selection 2-4
Software information
displaying using the ATI command 5-8
South Africa C-10
Spain C-10
Specifications
interfaces
ITU V.35 (modem to computer )B-5
NC port B-7
PHONE B-7
S-Register
04 (Line Feed Character) 5-11
S-Registers
00 (ring count to answer on) 5-7, 5-10
01 (ring) 5-11
02 (Escape code character )5-11
03 (Carriage Return Character) 5-11
05 (backspace character )5-12
06 (Wait for Dial Tone) 5-12
07 (Wait for data carrier) 5-12
08 (Pause delay dial modifiers) 5-13
10 (Carrier loss hang-up delay) 5-13
11 (DTMF tone duration) 5-14
12 (Escape code guard time )5-14
12 (escape sequence guard time) 5-6
18 (Test Time) 5-14
25 (DTR Delay) 5-15
26 (RTS/CTS delay) 5-15
30 (DTE Inactivity Disconnect) 5-15
38 (Disconnect buffer delay) 5-16
45 (Access security tone duration )5-16
46 (access security lead digit delay timeout) 5-
16
98 (AC Detect) 5-18
changing values
with the AT=x command 5-10
cross-referenced to AT commands and front
panel options A-38
displaying value 5-9
AT? command 5-10
standalone modems 1-2