Filter
Top Products
5
Test-Um NT955 Series
Introduction
The Validator-NT (NT955) Certier uses Speed and Performance
criteria to test and certify Ethernet network cables against IEEE802.3
specications up to 1 Gigabit. It also tests critical noise and delay
(Skew) measurements to assure that the respective cable runs will
perform to their maximum capability. Breakthrough technology has made
Speed and Performance Certication possible. It is the most up to
date way of seeing the physical condition of the wiring and how a specic
cable run will handle data ow on Ethernet speeds, 10 Megabit, 100
Megabit and Gigabit.
In addition to its state of the art 21
st
Century cable certication
technology, Validator-NT boasts a full selection of active network features
designed to report cable performance and verify connectivity to network
devices. These features include the ability to negotiate with network
components and discover both the speed and conguration of connected
equipment.
Validator
TM
IntroductionValidator
TM
Introduction