Filter
Top Products
74
Test-Um NT955 Series
6. Performing Active Network Tests
Active Network Tests include four functional test areas designed to report
cable performance and verify connectivity to network devices: Port
Discovery, Ping, Cisco Discovery Protocol, and Hub Flash. Select
Network Tests from the Start menu to access Network Tests. Use the
RJ45 ports to perform these tests.
Warning! Active Network Test Results will NOT be Saved.
Start
Untitled1.job
100%
Test-Um Inc.
validator
2005 Aug 25
10:53:01
Manual
Tests
Network
Tests
Auto
Test
Setup
Properties
Job
Manager
Port
Discovery
Network Tests
Untitled1.job
2005 Aug 25
10:53:01
Test-Um Inc.
validator
100%
Cisco
Discovery
Protocol
Hub
Flash
Ping Test
Port Discovery
Ethernet
Capabilities
Link established at: 1 Gbs
Remote device MDI/MDI-X: Auto
Remote device advertises: 1 Gbs FDX
Remote device advertises: 100 Mbs HDX/FDX
Remote device advertises: 10 Mbs HDX/FDX
Pair [A]: skew: 0.0 ns SNR: 30.0 dB
Pair [B]: skew: 8.0 ns SNR: 29.9 dB
Pair [C]: skew: 0.0 ns SNR: 30.0 dB
Pair [D]: skew: 8.0 ns SNR: 30.0 dB
Frequency Offset: 30 ppm
Untitled1.job
Test-Um Inc.
validator
100%
2005 Aug 25
10:53:01
AUTO
E-NET
E-NET
Figure 6.1 Port Discovery Network Test Flowchart
Validator
TM
Network Tests