Filter
Top Products
®
21
Start Using the Projector
Start Using the Projector-Operation
Select the Input Source
Press the INPUT Source button on the remote control to se-
lect the input source.
Select the Aspect Ratio
Press ASPECT to adjust the aspect ratio of the image.
Use OSD (OnScreen Display)
1. Press the MENU button on the remote control or the control panel to show the OSD main menu.
2. Press
◄
or
►
to select the sub-menu.
3. Press ▲ or ▼ to select the item of the sub-menu.
4. The selected item will be highlighted, press ▲ or ▼ to select the settings of the item and press ENTER
or the ENTER on the control panel to adjust the value of the item.
5. Press MENU to return to the previous menu.
6. Press MENU in the main menu or RETURN to close the OSD menu.
OSD Menu Tree
1st Layer 2nd Layer 3rd Layer Selections
Factory
Reset
MAIN
Aspect Ratio
16:9 /LetterBox / 4:3 / 4:3 Narrow / 16:10
/ 5:4 / Native
16:10
Presets
Recall Preset
Preset A/ Preset B / Preset C / Preset D /
Default
Save Preset Preset A/ Preset B / Preset C / Preset D
Overscan Off / Crop / Zoom Off
3D Control
3D Format
Off / Auto / Side by Side (Half) / Top and
Bottom /Dual Channel
Auto
DLP Link Off / On Off
3D Swap Normal / Reverse Normal
Dark Time 1ms / 1.5ms / 2ms / 2.5ms 2ms
Sync Delay 0~200 100
1080p24 3D Display 96Hz / 144Hz 96Hz
Input Select
HDMI1 / HDMI2 / VGA / COMP1 /
COMP2 /SDI / HDBaseT / SDI
HDMI1
Resync
IMAGE
Picture Mode Bright / Presentation / Video Bright
Brightness 0 ~ 200 100
Contrast 0 ~ 200 100
Saturation 0 ~ 200 100
Hue 0 ~ 200 100
Sharpness 0 0
Noise Reduction 0 0