Filter
Top Products
®
52
RS-232 Command
Simulated IR Remote Controller Commands
This control command simulates the IR remote controller and its control keys. It shares the same syntax of
operation command. It begins with characters "ky", followed by control commands and settings separated by
space blank [SP], and ended by carriage return pair "CR" and "ASCII hex 0D".Control command syntax:
ky[SP]<operation command>[CR]
Examples:
Power On ky power.on [CR]
Power Off ky power.off [CR]
List of simulated IR remote controller commands
Item Function Operation command Description
1 Power On power.on Power On
2 Power Off power.off Power Off
3 Menu menu Display OSD menu
4 RETURN return Exit
5 Enter enter ENTER key
6 Up up Move cursor upward or change upward
7 Down down Move cursor downward or change downward
8 Left left Move cursor to the left or change to the left
9 Right right Move cursor to the right or change to the right