Filter
Top Products
®
30
Start Using the Projector
OSD Menu - ADVANCED IMAGE
Color Space
This function allows you to change the corresponding color space for the input signal. In most cases, the
correct color space can be selected automatically by Auto mode. If the selection is not correct, you can use a
specific color space forcibly by selecting one of the following options:
• Auto
The projector detects the input signal and switches to the corresponding color space automatically.
• REC601
Set the color space to ITU-R BT.601.
• REC709
Set the color space to ITU-R BT.709.
• RGB-PC
Use the RGB color space and set the black to 0, 0, 0 RGB while set the white to 255, 255, 255 RGB (if an
8-bit image is used).
• RGB-Video: Use the RGB color space and set the black to 16, 16, and 16 RGB while set the white to 235,
235, 235 (if an 8-bit image is used) to correspond to the luminance value defined in the digital component
standard.
Gamma
When the ambient light is too bright and may affect the display of the details in the darker area of the image,
you can select from the following gamma options to adjust the chrominance of the image.
Optional Gamma table : 1.0 / 1.8 / 2.0 / 2.2 / 2.35 / 2.5 / S-Curve
Color Temperature
Use
◄►
to adjust the color temp of the projected image.
Dynamic Black
Use the
◄►
function to turn on/off Dynamic Black.
Adaptive Contrast
Use
◄►
to enable and disable the adaptive contrast function.