Filter
Top Products
®
58
Control the projector through a network
Press this button to validate email settings after setup is completed.
Control Projector with the PJLink Protocol
PJLink is a standard designed by Japan Business Machine and Information System Industries Association
(JBMA) for controlling projectors with genuine commands. A PJLink standard compliant projector from any
supplier can be controlled with these genuine commands. This product supports PJLink control commands.
Please set up password for PJLink connection in this page.
PJLink Security : Select On to enable PJLink password or Off to disable it.
Password : Set up password at length up to 32 characters.
For details on PJLink standard commands and connection methods, please visit the PJLink official web site.
Control Projector with TCP/IP Communication Protocol
This projector supports TCP/IP communication protocol. It enables you to send RS-232 operation commands
or simulated IR commands to control projectors which connected with RJ45 cable via terminal connection
application software, e.g. Tera Term. Please set up IP address and port number with the terminal connection
application software before controlling your projector with TCP/IP communication protocol:
IP Address :
IP address of projector
Port :
Please set transmission port number to 7000
See the section on serial interface RS-232 control commands for details on RS-232 operation commands or
simulated IR commands.