Filter
Top Products
®
50
RS-232 Command
Serial Command
Vivitek
Operation Value Remark 1
eb.red = ? + -(default) 0 ~ 32
eb.green = ? + -(default) 0 ~ 32
eb.blue = ? + -(default) 0 ~ 32
eb.reset (execute)
w2.recover
eb.adl = ? (default)
0 = Off
1 = On
trig.1 = ? (default)
0 = Screen
1 = 16:9
2 = Theaterscope
3 = 4:3
4 = 4:3 Narrow
5 = RS-232
6 = RS232 On
7 = RS232 Off
6 & 7 will not be activated if
Trig.1 = 5 is not set.
trig.2 = ? (default)
0 = Screen
1 = 16:9
2 = Theaterscope
3 = 4:3
4 = 4:3 Narrow
5 = RS-232
6 = RS232 On
7 = RS232 Off
6 & 7 will not be activated if
Trig.2 = 5 is not set.
auto.src = ? (default)
0 = Off
1 = On
model ? <string>
ser.no ? <string>
sw.ver ? <string> Retrieve software version
sw.version ?
<string>
ex: ack sw.version =
MD03-GD04-8B08-011D
(HostMCU,Scale,DDP, Ballast)
The 'soft.version' will reply
multi-lines version string for
different function module,
ex: Host_MCU, Scale, RJ45,
DDP, Ballast, Motor board
etc.
sw2.version ?
<string>
ex: ack sw2.version = LE03-
RD02-3C3C
(MotorBD,RJ45,W2)
h.refresh ? <number> kHz
v.refresh ? <number> Hz
pixel.clock ? <number> MHz
signal ? <string>
lamp1.hours ? <number>
lamp2.hours ? <number>
proj.runtime ? <number>
act.source ?
fact.reset (execute)