Filter
Top Products
®
28
Start Using the Projector
3D Swap
If the 3D imaged viewed through the 3D glasses for the left and right eyes are inverse, set the 3D Swap to
"Inverse". If the images are normal, keep the current setting as Normal.
Dark Time
Manually switch the Dark time for glasses tolerance.
Sync Delay
Manually switch the sync delay for glasses tolerance.
1080P 24 3D Display
Set the 3D 24Hz image frame rate to 96fps or 144fps.This option is only applicable when the input signal is
24Hz.
Note:
The projector provides DLP Link and 3D IR sync. After the 3D Mode is enabled, the built-in DLP Link or external 3D IR trans-
mitter can be used to synchronize the signal of the 3D glasses. Or, you may turn off the DLP Link sync signal and only select the
external 3D IR transmitter to synchronize the 3D signal.
Important reminders:
The people listed below should be aware when watching 3D images: Children under six years in age
People who are allergic to light, unhealthy and have the history of cardiovascular diseases
People who are tired or lack of sleep
People who are under the impact of drug or alcohol
Normally, it's safe to watch 3D images. However, some people might feel uncomfortable. Refer to the guidelines revised and re-
leased by the 3D League on December 10, 2008.People who watch 3D images need to take a break for at least 5 to 15 minutes
every thirty minutes or one hour