Filter
Top Products
1- 1
EO1-33038
1. INTRODUCTION
1. INTRODUCTION
1. INTRODUCTION
Thank you for purchasing the TEC B-SP2D series portable printer.
This printer displays its high performance with extraordinarily high speed
printing up to 80 mm/sec. It has a considerably compact and light body -
44 mm in height, 114 mm in width and 91 mm* in depth, weighing about 380 g*.
(*: For the GH40 model, 101 mm in depth and 410 g in weight.)
Besides the RS-232C, IrDA, Bluetooth, and wireless LAN which require no
cable for data transmission between a handy terminal and the printer are
adopted as data communication method.
Owing to a low power consumption design and use of a chargeable lithium-ion
battery as a power source, this printer can issue max. 650 pieces of 40-mm pitch
labels with a fully-charged battery. (The number of labels varies depending on
the operating environment, print condition, etc.)
An automatic power off function allows obtaining the battery driving time to the
maximum. There are four choices of the setting time: 1 minute, 5 minutes, 30
minutes and 120 minutes.
Loading a label roll is very simple; just put a label roll into the printer and close
the media cover. A belt holder provided on the rear of the printer enables the
printer to be held hands-free at your waist for improved productivity.
This manual contains general set-up and maintenance information and should
be read carefully to help gain maximum performance and life from your printer.
For most queries please refer to this manual and keep it safe for future
reference.