Filter
Top Products
4- 1
EO1-33038
4. INSTALLING THE PRINTER
4.1 LOADING THE BATTERY
4. INSTALLING THE PRINTER
4.1 LOADING THE BATTERY
1. Be sure to turn OFF the printer before loading the battery.
2. Use the B-SP2D-BT lithium-ion battery pack only. And to charge the
B-SP2D-BT battery pack, be sure to use the optional B-SP2D-CHG
battery charger or B-SP2D-CHG5 5-slot battery charger. Failure to do
this may cause explosion, combustion, or heat.
3. If the battery pack leaks liquid or gives out smoke or bad smell,
immediately stop using it and keep it away from fire. Failure to do this
may cause explosion or combustion.
4. In the United States, used lithium ion batteries should be returned to
the store where you bought the machine. (USA only)
5. LITHIUM ION BATTERY
DISPOSE OF PROPERLY
Caution: Do not handle damaged or leaking lithium ion battery.
Battery Cover
1) First slide the battery cover (1) and then open the battery cover (2).
WARNING!
NOTE: Regarding the charging procedure, refer to the Owner's Manual of
the B-SP2D-CHG or B-SP2D-CHG5.
(1)
(2)