Toshiba B-SP2D Printer User Manual


 
- v -
EO1-33038
Safety Precautions
This indicates that there is the risk of death or
serious injury if the machines are handled
improperly or contrary to this indication.
If water or any other liquid enters the machine, turn off the power.
Continuous use of the machine under such conditions may cause
fire or electric shock.
If the enclosure is damaged when dropped or subject to shock, turn
off the power. Continuous use of the machine under such conditions
may cause fire or electric shock.
Avoid continuous exposure to direct sunlight or high temperature as
this may cause fire.
Do not remove covers or modify the machine by yourself. Doing so
may cause fire or electric shock.
Avoid water, operation with wet hands or cleaning with a moistened cloth.
Failure to do this may cause fire or electric shock.
Do not wipe the machine with a cloth moistened with thinner or other
volatile solvent as this may cause fire or electric shock.
Use the specified battery only. Failure to do this may cause fire or electric
shock.
Danger of explosion if the battery is incorrectly replaced. Replace the
battery only with TOSHIBA TEC CORPORATION, Battery Pack Model
B-SP2D-BT, 7.4 V 1400 mAh Li-ion.
Discard used batteries according to the manufacturer's instruction.
ATTENTION:
II ya denger d'explosion s'il ya remplacement incorrect de la batterrie.
Remplacer uniquement avec une batterie du même type ou d'un type
équivalent recommandé par le constructeur.
Mettre au rebut les batteries usagées conformément aux instructions du
fabricant.
Do not disassemble and modify the battery because it has a protection
unit in it. Doing so may break the protection unit, causing the battery to
heat up, burst or burn.
If the battery gets wet, dry it completely. Using a wet battery may cause
fire or electric shock.
WARNING