Toshiba B-SP2D Printer User Manual


 
- iii -
EO1-33038
Safety Precautions
Do not disassemble, modify, or repair the product. Doing so may cause
injury. Also, modification is against the Laws and Regulations for Radio
Equipment. Please ask your TOSHIBA TEC sales agent for repair.
Precaution in use
This product communicates with other devices by radio. Depending on the
installation location, orientation, environment, etc., its communication
performance may deteriorate or devices installed near by may be affected.
Keep away from a microwave.
Communication performance may deteriorate or a communication error may
occur due to the radio emitted from a microwave.
Since the Bluetooth and wireless LAN use the same radio frequency band,
each radio wave may interfere with each other when they are used at the
same time, causing a deterioration of communication performance or a
disconnection of network. If there is any problem with connection, please
stop using either Bluetooth or wireless LAN.
Do not use the product on a metal table or near a metal object.
Communication performance may be deteriorated.
TEC-BTM Specification
Bluetooth class 2
Built-in protocol stack activated by Bluetooth V1.1 serial port profile
Operating temperature: -5 to 50°C 25% to 85%RH (No condensation)
Dimensions: 38.1 mm (W) x 25.4 mm (H) x 7 mm (D)
TEC-WLM Specification
Built-in IEEE802 Part 11b (802.11b)
Operating temperature: -5 to 50°C 25% to 85%RH (No condensation)
Dimensions: 67.8 mm (W) x 36.8 mm (H) x 7.5 mm (D)