Filter
Top Products
- 168 -
[C: Batch mode (Cut interval: 1, Issue count: 2)]
• “Automatic forward feed standby” is set to ON in the system mode.
• The swing cutter is used.
(1) Idling (during the forward feed standby)
A
A
A
B
Head positionCut position
(3) Completes printing the 1st label (A).
(4) Feeds the 1st label (A) to the cut position.
(5) Cuts the 1st label (A).
(7) Completes printing the 2nd label (B).
(8) Feeds the 2nd label (B) to the cut position.
(9) Cuts the 2nd label (B).
B
B
(10) Feeds back to the home position.
(6) Feeds back to the home position.
(2) Feeds back to the home position.
(11) After 1 second, performs 13.7-mm
automatic forward feed.