Toshiba BSX4TGS20QMR Printer User Manual


 
- 28 -
Parameter Initial Value
Centronics operation mode SPP
Plug-and-play operation mode OFF
Label end/ribbon end process setting TYPE1
Pre-peel-off process setting OFF
Back feed speed 3”/sec
MaxiCode specification setting TYPE1
B-SX4 V2 type: TPH104R7 Print head type setting
B-SX5 V2 type: TPH128R5
Status response ON
Label pitch 76.2 mm
Effective print length 74.2 mm
Effective print width B-SX4 104.0 mm
B-SX5 128.0 mm
Print method Thermal transfer print mode
Type of sensor Transmissive sensor
Feed speed B-SX4 6”/sec
B-SX5 5”/sec
Issue mode Batch
PC save automatic call
ON
Save No. on the CPU board (ID) 01
BASIC interpreter setting OFF
BASIC interpreter trace setting OFF
DHCP setting OFF
RFID module type selection None
RFID tag type selection None
RFID module’s destination code setting Depends on the module setting.
RFID error tag detection OFF
Password to protect error tag detection OFF: 0000
Access password setting 00000000
Automatic unlock function setting OFF
Max. number of RFID issue retries 3
Max. number of RFID read retries 5
RFID read retry timeout 4.0 sec.
Max. number of RFID write retries 5
RFID write retry timeout 2.0 sec.
RFID adjustment for retry Invalid: 0 mm
RFID radio output power level setting B-9704-RFID-U1: 251
B-SX704-RFID-U2: 18
B-9704-RFID-U1-EU-R: 50
B-SX704-RFID-U2-EU/US/CN/AU-R: 18
RFID AGC threshold setting 0
RFID channel setting AUTO
Q value 0
AGC threshold for data write 0
AGC threshold lower limit for retry 0
Hibiki tag multi-word write 0: OFF
Number of times RFID write succeeded 0
Number of times RFID write failed 0
System mode password operation setting OFF