Toshiba BSX4TGS20QMR Printer User Manual


 
- 370 -
e Bar code height calculation method
Example) In the following conditions:
203-dpi print head, Module width: 02, Recommended bar code height: 33x
(25.4 m / 203 dpi) x 2 dots x 33x 8.25 m
Since the height is specified in units of 0.1 mm, “0082” or “0083” is to be set as 8.25 mm.
f Max. number of data digits
Version of bar code Max. number of digits
GS1 DataBar 13 digits (Numeral only)
GS1 DataBar Stacked 13 digits (Numeral only)
GS1 DataBar Stacked Omnidirectional 13 digits (Numeral only)
GS1 DataBar Limited 13 digits (Numeral only)
GS1 DataBar Expanded 74 digits (Numeral only) *1
41 digits (Alphabet only)
GS1 DataBar Expanded Stacked 74 digits (Numeral only) *1
41 digits (Alphabet only)
*1: Max. 74 digits/41 digits, including AI and FID.
In the following case, the print results vary in spite of the same number of digits.
Non printable: “1A2B3C4D5E6F7G8H9I0J1K2L3M4N5O6P7Q8R9S0T1U2V3W”
Printable: “ABCDEFGHIJKLMNOPQRSTUVW12345678901234567890123”
g Check digit exclusively for each bar code version
Version of bar code Check digit
GS1 DataBar MOD79
GS1 DataBar Stacked MODE79
GS1 DataBar Stacked Omnidirectional MOD79
GS1 DataBar Limited MOD89
GS1 DataBar Expanded MOD211
GS1 DataBar Expanded Stacked MOD211
For the check digit calculation method, refer to ISO 24724 or AIM ITS 99-001.