Filter
Top Products
- 26 -
(9) RFID setting
• RFID module type selection RFID module’s destination code setting
• RFID tag type selection Password to protect error tag detection
• RFID error tag detection Access password setting
• Max. number of RFID issue retries Automatic unlock function setting
• Max. number of RFID read retries
• RFID read retry timeout
• Max. number of RFID write retries
• RFID write retry timeout
• RFID adjustment for retry
• RFID radio output power level setting
• RFID AGC threshold setting
• RFID channel setting
• Q value setting
• AGC threshold for data write
• AGC threshold lower limit for retry
(10) Initial values after RAM clear
• Initial values after maintenance counter clear
Parameter Initial Value
Label distance covered 0 km
Printed distance 0 km
Cut count 0
Head up/down count 0
Ribbon motor drive time 0 hour
Head-up solenoid drive time 0 hour
RS-232C hardware error count 0
System error count 0
Momentary power interruption count 0
• Initial values after parameter clear
Parameter Initial Value
Feed fine adjustment (PC) 0 mm
Cut position (or strip position) fine adjustment
(PC)
0 mm
Back feed fine adjustment (PC) 0 mm
Print density fine adjustment
(Thermal transfer print mode) (PC)
0
Print density fine adjustment
(Direct thermal print mode) (PC)
0
Ribbon motor drive voltage fine adjustment
(Rewind)
(PC)
0
Ribbon motor drive voltage fine adjustment
(Back tension) (PC)
0
Feed fine adjustment (Key) 0 mm
Cut position (or strip position) fine adjustment
(Key)
0 mm
Back feed fine adjustment (Key) 0 mm
Print density fine adjustment
(Thermal transfer print mode) (Key)
0