Toshiba BSX4TGS20QMR Printer User Manual


 
- 59 -
(4) Programming the radius of the rounded corner is effective only when the type of
line is 1 (rectangle). When the type of line is 0, designation of the radius is
ignored. When the type of line is 1, and the radius of the rounded corner is 000
or omitted, a rectangle is printed.
(5) A circle is assumed when:
[Effective print area] [mm]
Model B-SX4T B-SX5T
Cut Cut
Swing Rotary cutter Swing Rotary cutter
Issue mode
Item
Batch Strip cutter
Head-up
operation
not
performed
Head-up
operation
performed
Batch Strip cutter
Head-up
operation
not
performed
Head-up
operation
performed
Effective print width Min. 10.0 10.0
Max. 104.0 128.0
Effective print
length
3 ips:
79.0
3 ips:
30.0
3 ips:
79.0
3 ips:
23.0
Label Min. 6.0 21.4 23.0 6 ips:
91.0
6 ips:
30.0
6.0 21.4 23.0 5 ips:
87.0
5 ips:
23.0
10 ips:
(NOTE 1)
10 ips: –
(NOTE 1)
8 ips:
98.0
8 ips:
23.0
Max. 1496.0 1492.0 1496.0 1492.0
3 ips: 28.0 3 ips: 28.0
Tag Min. 8.0 23.4 6 ips: 28.0 8.0 23.4 5 ips: 28.0
10 ips: – (NOTE 1) 8 ips: 36.0
Max. 1498.0 1498.0 1498.0 1498.0
NOTE 1: The use of the rotary cutter at 10 ips is not supported for the B-SX4T.
Examples
[ESC] C [LF] [NUL]
[ESC] LC; 0200, 0350, 0305, 0050, 0, 4 [LF] [NUL]
[ESC] LC; 0200, 0050, 0200, 0280, 0, 4 [LF] [NUL]
[ESC] XS; I, 0001, 0002C3000 [LF] [NUL]
| X
2
- X
1
|
2
| Y
2
- Y
1
|
2
[
Radius of rounded corners
]
=
5.0 mm
28.0 mm
20.0 mm
30.5 mm
0.4 mm
0.4 mm
Origin (0, 0)
Effective print area