Filter
Top Products
8 TopAccess ADMINISTRATION TAB PAGE - SETUP
MENU (Scanning Function)
86 Setting up InternetFax Settings
Setting up InternetFax Settings
An administrator can configure the InternetFax settings needed for InternetFax transmissions in
the InternetFax submenu page in the Setup menu.
y Some settings may not be applied to the display on the equipment immediately upon saving.
The settings will be updated by pressing the [FUNCTION CLEAR] button on the control
panel or after an Auto Clear time period.
y The settings in the InternetFax submenu page are applied only when the Fax Kit is installed.
Setting up InternetFax settings
1
Select the [Administration] tab, enter the administrator's password
and click [Login].
To access the TopAccess administrator mode, see the Setup Guide for Printing
Functions.
2
Click the Setup menu and InternetFax submenu.
The InternetFax submenu page is displayed.
3
In the InternetFax submenu page, configure the InternetFax set-
tings as required.
The following setting can be configured in this page:
P.87 “InternetFax Setting”