Filter
Top Products
E6581741
- 74 -
10.2. BOOTP configuration
The BOOTP server function consists of allocating BOOTP clients their IP addresses.
The activation conditions for the drive BOOTP client are described in the “Configuration -
IP Addresses” section.
This window is used to configure the BOOTP server.
The drive MAC address is given on a label attached to its IPE002Z option module. The IP
address assigned to the drive must be entered in the table against the MAC address.
In this example, the Ethernet module MAC address is 00.80.F4.7D.02.C0, and its IP
address is 192.168.1.12.
Each line in the “Table of supplied addresses” can accept both the MAC and IP
addresses of a BOOTP client.