9-17
T
ROUBLESHOOTING
Some CD/DVDs The software or hardware configuration may
run correctly, but be causing a problem. Make sure the
others do not hardware configuration matches your software’s
needs. Check the CD/DVD’s documentation.
Check the type of CD/DVD you are using. The
drive supports:
DVD-ROM: DVD-ROM, DVD-Video
CD-ROM: CD-DA, CD-Text, Photo CD (single/
multi-session), CD-ROM Mode 1,
Mode 2, CD-ROM XA Mode 2
(Form1, Form2), Enhanced CD (CD-
EXTRA), CD-G (Audio CD only),
Addressing Method 2
Check the region code on the DVD. It must match
that on the CD-RW/DVD-ROM drive. Region
codes are listed in the
Optical media
section in
Chapter 2,
The Grand Tour
.
Cannot write correctly If you have trouble writing, make sure you are
observing the following precautions:
• Use only media recommended by TOSHIBA.
• Do not use the mouse or keyboard during
writing.
• Use only the software supplied with the
computer for recording.
• Do not run or start other software during writing.
• Do not jar the computer during writing.
• Do not connect/ disconnect external devices or
install/remove internal cards during writing.
If problems persist, contact your dealer.
Hardware and system checklist