Filter
Top Products
User's Manual
OPERATING BASICS
4-14
❑ Make sure writing or rewriting is completed before going into standby/
hibernation.
❑ Set the computer on a level surface and avoid places subject to vibration such
as airplanes, trains, or cars. Do not use an unstable surface such as a stand.
❑ Keep mobile phones and other wireless communication devices away from the
computer.
Drag’n Drop CD+DVD
Note the following limitations when you use Drag'n Drop CD+DVD:
❑ DVD-Video cannot be created using Drag'n Drop CD+DVD.
❑ DVD-Audio cannot be created using Drag'n Drop CD+DVD.
❑ You cannot use Drag'n Drop CD+DVDs music CD function to record music to a
DVD-R/-RW disc.
❑ Do not use the DISC Backup function of Drag'n Drop CD+DVD to copy DVD-
Video and DVD-ROM with copyright protection, because the copy will not
play correctly.
❑ You cannot backup a CD-ROM or CD-R/RW to DVD-R/-RW using the DISC
Backup function of Drag'n Drop CD+DVD.
❑ You cannot back up DVD-ROM, DVD-Video or DVD-R/-RW to CD-R/RW
using the DISC Backup function of Drag'n Drop CD+DVD.
❑ Drag'n Drop CD+DVD cannot record in packet format.
❑ You might not be able to use the DISC backup function of Drag'n Drop
CD+DVD to back up a DVD-R/-RW disc that was made with other software on
a different DVD-R/-RW recorder.
Data Verification
To verify that data is written or rewritten correctly, follow the steps below before
you write or rewrite a Data CD/DVD.
1. Right-click Data BOX and select Options to display the DATA DISC
Option window.
2. Mark the Record and Verify check box and select Byte compare.
3. Click the OK button.
The “Record and Verify” function automatically checks whether data has been
correctly recorded onto a CD/DVD. "Byte compare" compares the original data file
with the data recorded on the CD/DVD and checks that the data completely
matches.