Filter
Top Products
3.30 SETUP 3 Tests and Diagnostics
TECRA M4 Maintenance Manual (960-521) [CONFIDENTIAL] 3-99
The Ring Indicator is displayed only when the computer is in Resume mode
and this function cannot be used for a PC card-type modem. When any
modem is not installed, it is not displayed.
NOTE: 1. Do not remove the AC adapter and battery pack at the same time when you
use this feature. If you do so, data saved by the resume function will be lost.
You must also reset this option.
2. If you have set a password and the computer boots by the Auto Power On
function and Standby is on, the computer will start with the instant security
function enabled. The password = message is not displayed; however, you
must enter the password to use the computer.
3. This option is enabled only once, the setting is reset, after booting up.
(d) Diagnostic Mode
This option sets whether the BIOS Setup Diagnostic test is enabled.
Disabled The Diagnostic test is disabled
Enabled The Diagnostic test is enabled.
(e) Standby
Use this option to set the start speed of operation from standby mode.
Normal Normal speed of start to Windows operation. (Default)
Fast Quick start to Windows operation. It consumption more
electricity than normal mode. It lights orange during
standby mode.
NOTE: You can not choose standby mode with the setting [Fast] when the PC is running
with battery.