Filter
Top Products
4 Replacement Procedures 4.30 LCD harnesses & Wireless LAN/Bluetooth antennas
4-76 [CONFIDENTIAL] TECRA M4 Maintenance Manual (960-521)
6. Installing the hinge cap to the hinge assembly, secure the hinge assembly to the
display cover with the following screws.
• M2.5x6.0B FLAT BIND screw x2
Caution: Before installing the hinge cap, confirm the right arrangement of each harnesses
and cables.
7. Arranging the LCD harness on the display cover, secure the LCD harness hold plate
with the following screws.
• M2.5x6.0B FLAT BIND screw x2
8. Arranging the digitizer harness on the display cover, install the digitizer harness
ground plate.
9. Install the cover assembly and hinge rear cover to the display cover.
10. Secure the cover assembly to the hinge assembly with the following screws.
• M2.5x6.0B FLAT BIND screw x1
• M2.5x6.0S PSP TIGHT screw x1
11. Install the digitizer harness holder to the hinge assembly and secure it with the
following screws.
• Unique screw CPU stad x1
• M2.5x6.0S PSP TIGHT screw x1
12. Install the LCD harness holder to the hinge assembly and secure it with the following
screws
• M2.5x2.8B FLAT BIND screw x1
13. Arrange the wireless LAN antenna cables / Bluetooth antenna cable along the guide
of cover assembly.