Filter
Top Products
4.4 Memory module 4 Replacement Procedures
4.4 Memory module
Caution: The power must be turned off when you remove the memory module. Removing
the memory module with the power on risks damaging the module or the
computer itself.
Do not touch the memory module terminals. Any dirt on the terminals may cause
memory access problems.
Never press hard or bend the memory module.
Removing the memory module
To remove the memory module(s), confirm that the computer is in boot mode. Then perform
the following procedure. (See Figure 4-4.)
1. Turn the computer upside down.
2. Loosen the screw (with e-ring) fixing the memory slot cover.
3. Remove the memory slot cover.
4. Open the left and right latches and remove the memory module(s).
Screw (with e-ring)
Memory slot cover
Latch
Latch
Memory module
Figure 4-4 Removing the memory module
TECRA M4 Maintenance Manual (960-521) [CONFIDENTIAL] 4-13