Filter
Top Products
4 Replacement Procedures 4.21 PC card slot cover
4.21 PC card slot cover
Removing the PC card slot cover
The following describes the procedure for removing the PC card slot cover. (See Figure 4-
32.)
1. Lift the insulator and remove the following screws securing the PC card slot cover.
• M2.0x3.0S S-THIN FLAT BIND screw x2
2. Release the hook (2 points) and remove the PC card slot cover.
Hook
M2.0x3.0S
S-THIN FLAT BIND
PC card slot cover
Insulator
Figure 4-32 Removing the PC card slot cover
Installing the PC card slot cover
The following describes the procedure for installing the PC card slot cover. (See Figure 4-
32.)
1. Secure the hook (2 points) and install the PC card slot cover.
2. Secure the PC card slot cover with the following screws.
• M2.0x3.0S S-THIN FLAT BIND screw x2
4-52 [CONFIDENTIAL] TECRA M4 Maintenance Manual (960-521)