Filter
Top Products
4.18 Mic (L) cable guide 4 Replacement Procedures
4.18 Mic (L) cable guide
Removing the Mic (L) cable guide
The following describes the procedure for removing the Mic (L) cable guide. (See Figure 4-
28.)
1. Disconnect the Mic (L) cable from the connector CN6060 on the system board and
pull it out from the Mic (L) cable guide.
2. Disconnect the HDD cable from the connector CN1900 on the system board.
3. Remove the following screws and Mic (L) cable guide.
• M2.5x6.0B FLAT BIND screw x2
M2.5x6.0B
FLAT BIND
M2.5x6.0B
FLAT BIND
Mic. L cable guide
Mic. L cable
CN6060
HDD cable
CN1900
Figure 4-28 Removing the Mic (L) cable guide
TECRA M4 Maintenance Manual (960-521) [CONFIDENTIAL] 4-45