4 Replacement Procedures 4.6 Selectable bay module
4. Remove the following screws securing the plastic brace and the OD board and
remove them.
• M2.0x8.0S BIND screw x2
5. Remove the following screws securing the plastic frame and remove it.
• M2.0x3.0S S-THIN FLAT BIND screw x5
Plastic frame
M2.0x3.0S S-THIN FLAT BIND
M2.0x3.0S
S-THIN FLAT BIND
OD board
Plastic brace
M2.0x8.0S BIND
Figure 4-8 Removing the plastic frame
4-18 [CONFIDENTIAL] TECRA M4 Maintenance Manual (960-521)