Filter
Top Products
4 Replacement Procedures 4.10 QI button assembly / PC card slot brace
4.10 QI button assembly / PC card slot brace
4.10.1 QI button assembly
Removing the QI button assembly
The following describes the procedure for removing the QI button assembly. (See Figure 4-
14.)
1. Remove the following screw securing the QI button assembly and remove the QI
button assembly.
• M2.5x4.0B FLAT BIND screw x1
M2.5x4.0B FLAT BIND
QI button assembly
Figure 4-14 Removing the QI button assembly
Installing the QI button assembly
The following describes the procedure for installing the QI button assembly. (See Figure 4-
14.)
1. Install the QI button assembly to the slot of bottom cover assembly and secure it
with the following screw.
• M2.5x4.0B FLAT BIND screw x1
Note: When installing the QI button assembly, be sure to fit the button portion to the slot
of bottom cover assembly.
4-26 [CONFIDENTIAL] TECRA M4 Maintenance Manual (960-521)