Filter
Top Products
Overview
13
English
Controls and functions
Control panel
Remote control
Notes on remote control operation
Q Make sure there is nothing between the remote control and the projector’s IR sensor that
might obstruct the infrared beam.
Q The effective range of the remote control is up to 26.25 feet (8 meters) from the front of the
projector or 26.25 feet (8 meters) from the rear of the projector. The remote control must be
held at an angle within 45 degrees of the projector’s IR remote control sensor.
5. MENU
Turns the on-screen display control menu on.
Exits and saves the menu settings.
6. Focus Ring
Adjusts the focus of the projected image.
7. Zoom Ring
Adjusts the size of the projected image.
8. Temperature warning light
Lights up or flashes red if the projector’s
temperature becomes too high.
9. LAMP indicator light
Indicates the status of the lamp.
Lights up or flashes red when the lamp has
developed a problem. Please contact your
dealer for assistance.
10. AUTO d
Automatically determines the best picture
timings for the displayed image.
When the on-screen menu is activated, this
button is used as directional arrow.
11. INPUT
Switches input sources sequentially.
1. POWER indicator light
Lights up or flashes when the projector is
under operation.
2. MEMORY c
Sequentially recalls settings saved in memory
locations 1, 2, and 3.
When the on-screen menu is activated, this
button is used as directional arrow.
3. ARROWS <e/f/c/d>
When the on-screen menu is activated, arrows
#2, #3, and #10 (see illustration above) are
used as directional arrows to select the desired
menu items and to make adjustments.
4. ON/STANDBY , ,
Press and hold this button to turn the projector
on when it is in the standby mode. Or press
this button twice to turn the projector off.
2
1
3
4
5
11
10
3
9
8
7
6
p.21
p.21
p.33
p.33
p.26
p. 33
p. 23
p. 20 p. 24 p. 33
26.25 ft (8 m)