Filter
Top Products
Positioning your projector
15
English
Positioning your projector
Choosing a location
Your projector can be installed in one of four possible installation locations:
1. Floor in front of screen (Standard);
2. Ceiling in front of screen (Ceiling);
3. Floor at rear of screen (Rear);
4. Ceiling at rear of screen (Rear Ceiling).
Your room layout or personal preference will dictate which installation location you select. Take into
consideration the size and position of your screen, the location of a suitable power outlet, as well as
the location and distance between the projector and the rest of your equipment.
I. Floor in front of screen
Select this location with the projector placed
near the floor in front of the screen. This is the
most common way to position the projector for
quick setup and portability.
II. Ceiling in front of screen
Select this location with the projector suspended
from the ceiling in front of the screen.
Select Ceiling in the Setup > Projection Mode
menu after you turn the projector on.
III. Floor at rear of screen
Select this location with the projector placed
near the floor behind the screen.
Note that a special rear projection screen is
required.
Select Rear in the Setup > Projection Mode
menu after you turn the projector on.
IV. Ceiling at rear of screen
Select this location with the projector suspended
from the ceiling behind the screen.
Note that a special rear projection screen and
the Projector Ceiling Mounting Kit are required
for this installation location.
Select Rear Ceiling in the Setup > Projection
Mode menu after you turn the projector on.
WARNING
• Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the
unit. Attempting to clean/replace the lamp at a high site by yourself may cause you to drop
down, thus resulting in injury.
• If you wish to mount the projector on the ceiling, be sure to ask your dealer to do so. Mounting
the projector on a ceiling requires special ceiling brackets (sold separately) and specialized
knowledge. Improper mounting could cause the projector to fall, resulting in an accident.
• If the projector is ceiling-mounted, install the breaker for turning off the power in case of anom-
aly. Let everyone involved with the use of the projector know that fact.