Filter
Top Products
Additional information 36
Control terminal
Pin assignment
Interface format
1 Communication method RS-232C, 9600bps, No Parity, Data Length: 8 bits;
Stop Bit Length: 1 bit
2 Communication format
Only 1 command valid per communication.
If commands are to be sent consecutively, wait for the response from the projector before sending the
next command.
Main Commands
Contact your dealer for control cable and other commands.
Pin No. Signal Name Description
1 RD Receiving data
2 CTS Consent to send
3 DSR Data set ready
4 GND Signal ground
5 RTS Request to send
6 12V trigger Screen trigger. The projector
outputs 12 Voltage after
power-on.
7 TX Sending data
Mini DIN 8 pin connector 8 NC No connection
7
6
8
5
4
3
2
1
Command (5Byte) CR (0Dh)
Item Command
Power on/off X001X
Full X061X
4:3 X062X
Zoom X063X
Theater Wide X064X
Through X065X
Video X131X
Item Command
S-Video X132X
GBR-HD X133X
HDMI
TM
X134X
Component 1 X139X
Component 2 X140X