Filter
Top Products
Additional information
33
English
Indicator lights
The front of the projector has three lights that indicate its status. Check the following for information
about the indicator lights. If an abnormal condition is indicated, turn off the projector and contact your
dealer.
When the projector is in a normal state:
When the projector is in an abnormal state:
POWER TEMP LAMP State Remark
Orange Off Off Standby mode. ---
Flashing
Oange
Off Off The projector is powering up. Cannot turn off the projector.
Green Off Off
The projector is under normal
operation.
---
Flashing
Green
Off Off
(1) The projector needs 110
seconds to cool down, as it
was abnormally shut down
without the normal cooling
down process. Or
(2) The projector needs to cool
down for 110 seconds after
the power is turned off.
Cannot turn on the projector.
POWER TEMP LAMP State Remark
Orange Off Red
(1) The lamp has exceeded its
usage life. Or
(2) The lamp is not properly
attached or is damaged.
Solution:
• Install a new lamp.
• Please contact your dealer
for assistance.
Orange Red Off
The internal temperature is too
high.
• The intake ventilation or the
exhaust ventilation is blocked.
• The projector may be in a
poorly ventilated location.
• The ambient temperature
may be too high.
Solution:
• Make sure the ventilation
holes are not blocked.
• Relocate the projector.
• Stop using the projector until
the ambient temperature
falls within the specified
range. The maximum
operating temperature is
specified as 35°C (95°F).
Orange
Flashing
Red
Flashing
Red
The fans are not working.
Solution:
• Make sure the power supply
is stable.
• Check if there is an obeject
stuck in the fans.
• Contact your dealer.