Filter
Top Products
POWER SUPPLY CORD SELECTION 6
POWER SUPPLY CORD SELECTION
If your line voltage is 220 to 240V, use one of the following types of cable.
IMPORTANT PRECAUTIONS
Save Original Packing Materials
The original shipping carton and packing materials will come in handy if you ever have to ship your
projector. For maximum protection, repack the set as it was originally packed at the factory.
Moisture Condensation
Never operate this unit immediately after moving it from a cold location to a warm location. When the
unit is exposed to such a change in temperature, moisture may condense on the crucial internal
parts. To prevent the unit from possible damage, do not use the unit for at least 2 hours after there is
an extreme or sudden change in temperature.
Location and Installation
• Do not place in hot locations, such as near a heater. Doing so could cause malfunction and shorten
the life of the projector.
• Avoid locations with oil or cigarette smoke, which can affect the quality and useful life of the
product’s optical parts and darken the screen.
• Do not use the product vertically in any upright position or slantwise at an angle of 20 degrees or
more.
• Using this product near a TV or radio may cause interference in the image or sound. If this
happens, move it away from the TV or radio.
• In a high-altitude location where the air is thin, cooling efficiency is reduced; therefore, use the
projector in a cool area.
Plug
configuration
Plug type Line
voltage
Plug
configuration
Plug type Line
voltage
EURO 220 - 240V Australian
240V
10A
200 - 240V
UK 220 - 240V Switzerland
240V
6A
200 - 240V
Use a 5A fuse approved by ASTA or BSI to
BSI362.
Always replace the fuse cover after
changing the fuse.
North
American
240V
10A
200 - 240V