Filter
Top Products
Menus 26
Using the menus
The projector is equipped with on-screen display (OSD) menus
for making various adjustments and settings.
There are several OSD languages provided for your selection.
Refer to for more information about the available
languages.
The following example describes how to correct the keystone
distortion.
Picture menu
The functions provided in this menu allow you to manually adjust image quality. Before making
adjustments, try one of the default modes (Dynamic, Standard, Theater 1, or Theater 2). These
modes have preset values for various lighting environments and presentation purposes.
1. Contrast: Adjusts the degree of difference
between dark and light in the image. The
higher the number, the greater the contrast.
2. Brightness: Adjusts the brightness of the
image. The higher the number, the brighter the
image. The lower the value, the darker the
image. Adjust this control so the black areas of
the image appear as black as possible and that
the detail in the dark areas is visible.
1. Press the MENU button to display the on-
screen menu.
2. Use e or f to highlight Setup and then press
MENU.
3. Use c or d to select Keystone.
4. Adjust the keystone values by
pressing e or f.
5. Press the MENU button twice* to
save the settings and close the OSD.
*The first press leads you back to the
submenu and the second press closes the
on-screen menu.
MENU
+
-
p.28
-30
50
+70
50
-30
+70