Filter
Top Products
Using the projector and remote control 24
3. Select the second signal input from the Display > PIP or Display > POP menu.
4. You can press the SWAP button on the remote control repeatedly to switch the corresponding
positions of the two windows, .
5. Between the two images, the bigger one of PIP or the left one of POP is always the active
window. You can change the input signal settings in the active window only.
6. To adjust the size of the PIP window, press + or -.
7. To adjust the position of the PIP window, press the ARROW buttons (c/e/d/f).
8. To turn off the PIP or POP function, push PIP or POP button again.
PIP ---
POP ---
Q If the selected input signal is not available, the image will be black.
Q If you are using this function on commercial video software or on a broadcast or cable broadcast
except for the purpose of your private viewing and listening, it may infringe the copyright protected
by the copyright laws.
Q When the PIP/POP function is activated, some of the Faroudja functions may not be available.
Pausing the picture
To pause the picture, press the FREEZE button on the remote control. Pressing the FREEZE button
again cancels the freeze function.
Q The icon will appear while Freeze is in effect.
Q Even if an image is frozen on the screen, the pictures are running on the video or other device. If
the connected devices have active audio output, you will still hear the audio even though the
image is frozen.
Q Using the Freeze function on commercial video software or on a TV or cable broadcast for any
purpose other than your private viewing may be prohibited under the Copyright Laws of the United
States and other countries, and may subject you to civil and criminal liability.
Turning the power off
Follow the steps below.
1. Press the ON/STANDBY button on the projector or remote
control. A confirmation message will appear. To turn off the
projector, press ON/STANDBY again.
2. The Power indicator light will flash green and the fans will run
for about two minutes to cool the lamp. The projector will not
respond to any commands until the cooling process is
complete.
3. The Power indicator light will be a solid (non-flashing) orange
when the cooling process has finished and fans stop.
4. If the projector will not be used for an extended period, turn off
the main power switch and unplug the power cord from the
power outlet.
Q If you accidentally press the ON/STANDBY button and do not
want to turn off the power, wait until the confirmation message
disappears.
+
-
+
-