Filter
Top Products
- 21 -
6 F 3 H 1 0 0 1
7.2.1 Normal Display Screen
The Normal Display screen indicates the operational status of the UPS and provides a total of
nine screens: one Operation Guidance Display screen and eight Measurement Value Display
screens.
Table 7.2 presents examples of these screens.
Table 7.2 Normal Display Screen
No. LCD Screen Description
1 Help screen
(Example 1) Operation status
Shows the status of the UPS at the top and help
messages or measurements underneath.
(Example 1)Shows help messages when starting
or stopping operation.
(Example 2) (Example 2)Shows the output voltage and output
current during operation.
Voltage (example)
Current ratio (example)
2 Measurement screen
(Example) Output voltage
Shows the output voltage between lines.
3 Measurement screen
(Example)
Output current (RMS
value)
Shows the RMS value for the output current for
each phase as a proportion (%) of the rated
value.
4 Measurement screen
(Example) Output current (peak)
Shows the peak value for the output current for
each phase as a proportion (%) of the rated
value.
Peak value for actual output current
TMRS value for rated current × 1.41
× 100 [%]
OPERATION GUIDANCE
MOVE #52R TO “ON” POSITION
O/P VOLTAGE (LINE)
U - V 200[V]
V - W 200[V]
W
- U 200[V]
O/P CURRENT (r.m.s)
U 50[%]
V
50[%]
W 50[%]
O/P CURRENT (PEAK)
U 50[%]
V
50[%]
W 50[%]
UPS SUPPLY
AC-VO 200[V]
AC-
I O 50[%]