Filter
Top Products
- 47 -
6 F 3 H 1 0 0 1
Table 9.7 Warning-3 (Operation control)
# Item LCD Message
Indication
Description
1 59C BYPASS OV Bypass input voltage is high.
2 27C BYPASS UV Bypass input voltage is low.
3 95C BYPASS ASY Bypass input frequency error.
Table 9.8 Warning - 4 and 5 (Guidance)
# Item LCD Message
Indication
Description
1 49H LOAD LIMIT Load has exceeded prescribed level.
2 51LI O/P OC (PEAK) Load current peak value is high.
3 72BO 72B MIS OPE. 72B has gone off during operation.
(Including operation error)
4 26B BATT FAULT1 Battery temperature has risen.
5 33B BATT FAULT2 * Battery fluid level has gone below prescribed level.
6 80B2 BATT UV (ALM) Battery voltage is near discharged voltage.
7 76CH BATT OC Charging current is high.
8 47R AC PHASE ERR Phase ration of AC input is reserved.
9 47C BYPASS ERR Phase ration of bypass input is reserved.
10 48S STARTUP ERR Startup was not completed.
11 52CO 52C MIS OPE. 52C has gone off during opearion.
(Including operation error)
12 83F SWITCH ERR Changeover switch error.
*
This message is deleted in case of a sealed type NS and HHS or MSE battery.